For many 2022 Civic Si owners in the US, one feature that seems surprisingly absent is a sunglass holder. Despite being a practical addition, it’s noticeably missing, especially for those accustomed to having one in their daily drives. If you’re finding yourself wishing for a dedicated spot to store your sunglasses in your 2022 Civic Si, you’re in luck. This guide will walk you through a straightforward DIY installation using a sunglass holder from a 2023 Acura Integra. It might sound daunting to modify your car’s headliner, but the process is simpler than you might think, requiring basic tools and a bit of careful work.
Step-by-Step Guide to Installing a Sunglass Holder in Your 2022 Civic Si
This modification utilizes a sunglass holder sourced from a wrecked 2023 Acura Integra. While the exact Acura part number for the housing isn’t provided, Acura parts departments should be able to assist you in locating it. The installation process is designed to be reversible and integrates seamlessly with your 2022 Civic Si‘s existing structure.
Removing the Original Map Light Console
The first step involves removing the factory map light console. This piece is secured by tabs at the rear and push-in retainers at the front. To remove it, apply firm, direct downward pressure at the front of the console to disengage the retainers. Once the front is loose, carefully angle the unit downwards and pull it out to clear the rear tabs. This should detach the original piece without excessive force.
Preparing the Acura Integra Sunglass Holder
The replacement sunglass holder from the Acura Integra is designed with similar push-in retainers for the front and screw holes for the rear mounting. Crucially, the 2022 Civic Si already has pre-existing locations for clip nuts that perfectly align with these screw holes. This thoughtful design simplifies the installation considerably, eliminating the need for drilling or complex modifications.
Cutting the Headliner for the New Unit
This is arguably the most nerve-wracking part: cutting into your car’s headliner. To ensure accuracy, create a template using a cereal box or similar thin cardboard. Trace the outline of the new map light section onto the template, using the original map light section as a guide for alignment. Tape this template to the headliner, carefully aligning it with the existing map light opening. Use chalk to clearly mark the cut line onto the headliner fabric. Employ a breakaway extendable knife or a similar sharp tool to carefully cut along the chalk lines, removing the necessary section of the headliner.
Securing the Sunglass Holder
With the headliner cut, the next step is to install M6 clip nuts into the pre-drilled locations in the Civic’s roof frame. These clip nuts will receive the screws for the rear of the sunglass holder. For hardware, M6 clip nuts, 20mm flanged M6 bolts, and 3/8″ washers are recommended. These parts are readily available at automotive parts stores like Advanced Auto Parts. Test fitting the hardware before purchase, as suggested in the original guide, is a smart move to ensure compatibility.
Final Installation and Enjoying Your New Sunglass Holder
Connect the wiring harness to the new sunglass holder unit, ensuring a secure connection. Then, align the front push-in retainers of the sunglass holder with their corresponding slots in the headliner and push firmly to secure the front. Finally, use the flanged bolts and washers to fasten the rear of the sunglass holder to the clip nuts you installed earlier. With everything secured, your new sunglass holder is installed! You now have a convenient and factory-integrated location to store your sunglasses in your 2022 Civic Si.
This simple modification addresses a minor oversight in the US 2022 Civic Si design, enhancing practicality and convenience. By utilizing readily available parts and following these steps, you can easily add this useful feature to your vehicle.
